Creating an Account/Registration

RSS (Öffnet neues Fenster)(Öffnet neues Fenster) Historie Drucken

 

Creating an Account/Registration

Limited information is available to guest users of PrepToolkit. To gain access to additional information, you must register and sign in. Users are encouraged to utilize their government, agency, non-profit, or corporate email accounts during registration. The use of personal email accounts is discouraged if other options are available. 

Once you have registered, your access will continue to be limited until your account is vetted and approved by a manager of PrepToolkit. Vetting of your account may take 1-2 days. Personal email accounts may take additional time to be vetted. 

Note: Users who have a FEMA Personal Identity Verification (PIV) card do not need to register. Your PrepToolkit account will be automatically created upon initial sign in. 

Sign In for FEMA PIV Users

 

If you have a FEMA Personal Identity Verification (PIV) card, you must use it to access PrepToolkit. sign in with your PIV Card: 

  1. Within PrepToolkit, select the “Sign In” link on the top right corner of the screen.

    A header is shown with the U.S. Department of Homeland Security Seal – FEMA alongside “Preparedness Toolkit.” Home, Communities, Library, and Sign In links are provided. The Sign In link is highlighted

  2. Insert your PIV card into your card reader.  
  3. Select FEMA Employees - Sign in with PIV TDL

    If you are a Personal Identity Verification (PIV) card holder, insert your PIV card into the card reader and select the PIV Sign-In With PIV below to select your certificate and enter your PIN.” The FEMA Employees – Sign In With PIV button is highlighted beside an image of an identification card stating United States Government, John Doe, USA, with the U.S. DHS seal shown. Below the button and image, the following instructions are shown: “OR For users without a PIV card, enter your username and password to sign-in. If you are not already registered, select Register below

  4. Select your certificate and enter your PIN.  

PIV card users are encouraged to populate their user profile in PrepToolkit and to keep it up-to-date. This information is used in various places throughout the system. Keeping an accurate, complete profile will help facilitate a smoother experience when registering for exercise meetings, becoming a member of a community or exercise, etc. 

Users Without PIV Cards

 

Registration

  1. Within PrepToolkit, select the Sign In button in the top right corner of the screen.

    A header is shown with the U.S. Department of Homeland Security Seal – FEMA alongside “Preparedness Toolkit.” Home, Communities, Library, and Sign In links are provided. The Sign In link is highlighted

  2. Select the “Register” link under the existing user sign In modal.

    The FEMA PrepToolkit Sign In page displays the "Register" button emphasized for selection

  3. Provide your first and last name, your email address, and create and confirm a password.
  4. Select “Register”

    The FEMA PrepToolkit Sign In page displays the Register modal open with fields to be filled in with personal information for registration. The "Register" button emphasized for selection

  5. A confirmation message will appear, noting that a registration link has been sent to the email address you provided. Visit your email inbox and select the message from [email protected]. Note: This email may take a couple of minutes to arrive in your inbox. If this email does not appear in your inbox, be sure to check your junk and/or spam folders.

  6. Navigate to the link provided in your registration email. It will route you to the area of PrepToolkit where you can provide the remaining details to set up your account. Note: This link will only be active for 60 minutes. If this window has passed, please begin at step 1 to generate a new registration link.

  7. Provide the requested account information. Select the question mark icon beside the New Password field to view password requirements.

  8. Once you have registered, your access will continue to be limited until your account is vetted and approved by a manager of PrepToolkit.

Users are encouraged to keep their user profile up-to-date in PrepToolkit. This information is used in various places throughout the system. Keeping an accurate, complete profile will help facilitate a smoother experience when registering for exercise meetings, becoming a member of a community 

Sign In

 If you do not have a FEMA PIV Card, you must register with PrepToolkit before you will be able to sign in. To sign into PrepToolkit after registration: 

  1. Within PrepToolkit, select the, “Sign In” button at the top right corner of the screen.

    A header is shown with the U.S. Department of Homeland Security Seal – FEMA alongside “Preparedness Toolkit.” Home, Communities, Library, and Sign In links are provided. The Sign In link is highlighted

  2. Provide your username or email address and your password. Select Sign In

    The FEMA PrepToolkit Sign In page displays the sign in button emphasized for selection

    .  
  3. Go to your email to retrieve the MFA code you will need to login to PrepToolkit

    An email inbox displays that the MFA Code needed for Sign In to PrepToolkit along with a warning that the code will expire in 10 minutes..